Guest Blogger Hiren Mistry, Nuffield Research Placement Student working at the University of Northampton. How to use a PS3 Controller to...
In this series of posts, I am going to look at experimenting with a few tools that allow robots to be simulated, programmed, these are ide...
In previous posts ( post 1 , post 2 ) I have raved over the brilliant combination of Mozilla's AFrame and Jerome Etienne's fantastic...
Dr Scott Turner Director of Computing at Canterbury Christ Church University , Kent and a Code Club Volunteer. Age Range 10-14 ye...
This post discusses a project that I want to play with since finding out the new Microbit V2 has an built in microphone - this is to use the...
I am going to try to persuade you that using A-Frame it is not hard to do some simple Augmented Reality (AR) for free, via a browser, but th...
The microbit is a great piece of kit, not least of which because of the range of programming languages and tools that can be used with it - ...
For a few years, I have been a fan of Aframe and AR.js - these are fantastic tools for creating web-based Virtual and Augmented Reality. No...
I was asked recently if the USB robot arm could be programmed - I knew the answer was yes. The Arm came from the CBiS Education Robot Arm ...
You can control servos (small ones) from a Micro:Bit directly. Following a link from the David Whale (Twitter @ whaleygeek ) , thank you, t...
Monday, 30 November 2020
Popular post on this blog: November 2020
Sunday, 8 November 2020
'Dancing' Snowman - ok flashing LEDs to music
This post discusses a project that I want to play with since finding out the new Microbit V2 has an built in microphone - this is to use the new microbit in combination with a Ryan Walmsley's SnowPi
RGB https://www.kickstarter.com/projects/ryanwalmsley/snowpi-rgb-edition to make the snow,man change the LEDs as the music's volume changes via the microphone. First though, thank to you to the fabulous Rachel @ItsAll_Geek2Me from Microbit Education Foundation for letting me have Microbits to play with.
So thehe starting point is the Snowman, essentially following the instructions at snowpi.xyz for setting it up and writing an initial program in makecode for the snowman. If fact the code in this project is a twist on the code found there.
You need to use https://makecode.microbit.org/beta#editor at the time of writing and add the neopixels extension (see snowpi.xyz for more details) Some new blocks in the current beta version of makecode add for the new microbit; including some new blocks for the microphone under inputs - a very useful resource for details on the new microbit and programming it is https://tech.microbit.org/latest-revision/ the microphone blocks are in the input section.
The code is availabe at https://makecode.microbit.org/_KDo9KghUhPbw it is a bit hard to see the code in the images below.
Snowpi and Microbit v2 reacting to music via the microphone @ItsAll_Geek2Me pic.twitter.com/3LXZEBJ166
— Dr Scott Turner (@scottturneruon) November 7, 2020
Next stop probably try this idea with the Kitronik's cube:bit (see https://robotsandphysicalcomputing.blogspot.com/2018/09/build-disco-cubebit-that-reacts-to-music.html )
If you do something more with this code please add a comment to the post.
Thursday, 5 November 2020
Free your Augmented Reality
Dr Scott Turner
Director of Computing at Canterbury Christ Church University, Kent and a Code Club Volunteer.
Age Range 10-14 years
Year Group 5-9, Code Clubs.
Lesson Type: Web programming
Objective
How to use free web technologies to create Augmented Reality.
Requirements
A computer capable of accessing the required software and ideally has a webcam
Access to AR.JS Studio (free) https://ar-js-org.github.io/studio/
Access to webhosting or free webhosting sites such as Glitch.com or GitHub
An image (png, jpeg, gif), or video (mp4)
(optional) mobile device with a camera and internet access.
Augmented Reality (AR) is becoming increasing popular, but often means using proprietary packages such as Blippar to create your own, or write the code yourself. A middle ground on this is AR.js Studio which allows web-based AR applications to be developed completely with out writing code (if connected to a GitHub account) or with a few minor tweaks otherwise
Activity 1
We are going to link a marker (in this case a specific image with a black border and the letters AR) to an image using AR.JS Studio, to produce a webpage that uses the a camera connected to a browser to replace the marker on screen with the image.
First go to https://ar-js-org.github.io/studio/ and pick marker based project
Download the marker by clicking on the Download marker link, print out a copy of it, you will need this later.
Now export the project. If you have a Github account this is the easier route once the connection between the website and GitHub is set-up it creates the URL containing your project. Now you just run that in a browser on a mobile device or computer with a webcam and start waving your printed out marker to see it in action. My advice is, if you don't have your own web-server, get yourself a Github account and choose that option, and you just log-in to your account. You will need to give the project a name and then push Publish. Depending on your internet connection it can take a few seconds to a minute or so, but it is worth the wait. An example is available at https://scottturneruon.github.io/Testobjectexs5y2/
If this is not possible or you have your own space to store webpages then the download the package is useful. This produces a zipped version of the file and we need to add it to a web-server. To see that in action, the free web-hosting site Glitch.com is going to be used to host it, you may have to set up a free account.
First step is unzip the files from AR.JS studio. Open Glitch and start a new project, choose a Hello-webpage it will automatically generate a name for the project.
From the unzip file copy the contents of the index.html file and in Glitch replace the contents of the index file already there with the contents on the unzipped index.html.
Open the Assets folder in Glitch and then click on upload new asset, selected the image from the unzipped file.
Click on the uploaded image and it will give you a long URL press the copy button.
Go back to the index.html find the section that goes <a-imag src="assets/asset.png" replace assets/asset.png with your copied URL from the asset folder.
Go back to the unzipped asset folder and then in Glitch upload the marker.patt and get the URL in the same way as we did with the image again copying the URL for this asset.
This time in the section that starts <a-marker replace the assets/marker.patt in url="assets/marker.patt" with the URL copied from the asset folder for marker.patt
Now we can have fun. Near the top of the screen there is what looks like a pair of sunglasses this lets us test it out. Give permission for the camera to share in the browser (if allowed) and wave the marker in front of the camera. In my case it replace the marker with an image of the planet.
We can now share it with the world. In the Glitch go to share and change the tab to Live App and press copy you should now have copied a new address for example https://shelled-humdrum-rainbow.glitch.me that we can use on a browser including those on mobile devices. A word of warning there can sometimes be a problem with the Glitch approach working on IOS on some devices.
Follow on Activities
Create your own marker especially for your school or club and have it display a image, video or for a real challenge a 3D model. A guide on creating the markers is available at https://github.com/AR-js-org/studio/blob/master/what-makes-a-good-marker.md
Try using location-based AR option in AR.JS, you will need to use a tool like https://www.freemaptools.com/convert-uk-postcode-to-lat-lng.htm to the latitude and longitude – could be great for outside activities.
Subscribe to:
Posts (Atom)
Remote Data Logging with V1 Microbit
In an earlier post https://robotsandphysicalcomputing.blogspot.com/2024/08/microbit-v1-datalogging.html a single microbit was used to log ...
