Skip to main content

Micro:bit Robot Arm

In this post, I am discussing using a recently bought  CBIS BBC micro:bit RobotArm, but play with it using Python (or rather micropython).


Set Up
Not a lot to set up really. The base and the arm are separate and are attached with four screws (so you will need a screwdriver). 

 The most difficult bit is the wiring the arm to the circuit/breakout board on the base, but instructions are available through CBiS Resource portal http://portal.cbis.education/teacher/hardware. You will need a log-in for this. Also on that site, there is an example Microsoft Blocks code which includes some instructions on inserting the microbit as well - the micro:bit goes in buttons side facing upwards.
Code
Taking the values from the instruction sheet for setting it - the micro:bit key bit - the following pins were selected.
Base                     Pins 0 and 1
Shoulder               Pins 8 and 12
Elbow                   Pins 2 and 13
Wrist                    Pins 14 and 15
Gripper                 Pins 16 and 11 - this is the only one I haven't got working yet.

 So to test it out, a simple bit of code to drive each motor in both directions was produced and is shown below.

This is good fun to play with. The use of the micro:bit is a good idea because it's ease of use to plug-in and play with.

 All opinions in this blog are the Author's and should not in any way be seen as reflecting the views of any organisation the Author has any association with. Twitter @scottturneruon
Labels:

Comments

Post a Comment

Popular posts from this blog

Robot Software

In the previous blog posts for this 'series' "It is a good time...."  Post 1  looked at the hardware unpinning some of this positive rise in robots; Post 2  looked at social robots; Post 3  looked at a collection of small robots; Post 4 looked at further examples of small robots Robots, such as the forthcoming Buddy and JIBO, will be based some established open sourceand other technologies. Jibo will be based around various technologies including Electron and JavaScript (for more details see:  http://blog.jibo.com/2015/07/29/jibo-making-development-readily-accessible-to-all-developers/ ). Buddy is expected to be developed around tools for Unity3d, Arduino and OpenCV, and support Python, C++, C#, Java and JavaScript (for more details see http://www.roboticstrends.com/article/customize_your_buddy_companion_robot_with_this_software_development_kit ).  This post contin ues with some of the software being used with the smaller robots.  A number ...
1 comment
Read more

Speech Recognition in Scratch 3 - turning Hello into Bonjour!

The Raspberry Pi Foundation recently released a programming activity Alien Language , with support Dale from Machine Learning for Kids , that is a brilliant use of Scratch 3 - Speech Recognition to control a sprite in an alien language. Do the activity, and it is very much worth doing, and it will make sense! I  would also recommend going to the  machinelearningforkids.co.uk   site anyway it is full of exciting things to do (for example loads of activities  https://machinelearningforkids.co.uk/#!/worksheets  ) . Scratch 3 has lots of extensions that are accessible through the Extension button in the Scratch 3 editor (see below) which add new fun new blocks to play with. The critical thing for this post is  Machine Learning for Kids  have created a Scratch 3 template with their own extensions for Scratch 3 within it  https://machinelearningforkids.co.uk/scratch3/ . One of which is a Speech to Text extension (see below). You must use this one ...
5 comments
Read more

Scratch and web-cams in Scratch 3

Scratch 3 was launched on 2nd January 2019, so I wanted to know would Webcams still work with Scratch 3 as it did with Scratch 2. For example, in a previous post  Scratch, webcams, cats and explosions  the cat (Scratch) moved across the screen and a button burst when the object moved in the camera onto it.  Can the same thing be done in Scratch 3? The short answer is yes, but it is done slightly differently. The first change the video capture is not there in the blocks automatically; but is an extension that needs to be added. First, you need to add the extension blocks for video sensing. Go to the little icon at the bottom left of the screen (as shown below) this takes you to the extensions menu. Next, find the Video Sensing option and selected. The webcam, if enabled, with start automatically. A video sensing set of blocks is now in the list of block options.  The rest is very similar to doing this in Scratch 2. Moving ...
3 comments
Read more