Crumblebot - explorer bot?

In an earlier post I played with 4Tronix's CrumbleBot to make an edge follower robot (http://robotsandphysicalcomputing.blogspot.co.uk/2015/07/edge-following-crumblebot.html). I wanted to play a little more, so I looked at making it 'explore' a room a bit and recently 4Tronix's have released an add-on panning ultrasonic sensor for the CrumbleBot - how can I resist?

What is a CrumbleBot
The CrumbleBot (http://4tronix.co.uk/store/index.php?rt=product/product&product_id=493) is based around the Redfern Electronic's Crumble Controller (http://redfernelectronics.co.uk/crumble/) and Crumble software (http://redfernelectronics.co.uk/crumble-software/); providing an intuitive graphical interface (similar to Scratch) to control two motors and four inputs/outputs. The CrumbleBot comes with a number sensors including  line-detecting sensors and Light-Dependent Resistors for light detection and you use crocodile clips to connect the sensors to the inputs/outputs. In essence, this is nice little framework for simple robotics and quite forgiving; the commands are kept to a minimum and loading the program to the bot is just one action. One suggestion, is to make sure you order the Crumble Controller at the same time as CrumbleBot, it is easy to forget if you haven't already got a crumble controller already.

Building the 'Bot' is relatively simple and 4Tronix have provided some easy to follow instructions on-line (http://4tronix.co.uk/crumble/CrumbleBot.pdf) that are almost foolproof (I manage to build it!).


Panning sensor
This is an add-on piece (http://4tronix.co.uk/store/index.php?rt=product/product&keyword=crumblebot&category_id=0&product_id=556), at the time of writing this costing around £12 (with VAT), which adds a ultrasonic sensor that pans and is controlled using Crumble. The instructions for setting this up are available at http://4tronix.co.uk/blog/?p=1353 you need to read from about half way down the page, they are detailed and please don't do what I did and skim through them, missing out an important action. 


'Explorerbot' 
The Crumblebot is built, the Panning ultrasonic sensor is connected - in my case IO port A for the servo to pan the sensor and IO port D for the input from the sensor - time to program it. The instructions in the set-up http://4tronix.co.uk/blog/?p=1353 include a useful little starting routine to read the sensor and 'zero' the sensor's position.

So my exploring routine is based around 

• panning the sensor by +/-20 degrees of the sensor facing forward.
• if an object is 5cm or less from the sensor; reverse the Crumblebot and make a slight turn; otherwise move forward.

The code is shown below:

The video shows the 'Explorerbot' in action.

Conclusion

It is good fun; this is a relatively simple problem but still fun. The Crumble language is Scratch-like and simple to set up and use. Crumble as a system I have, so far, found quite forgiving and this is useful - less fear of making a mistake.The panning sensor gives this already cute robot an even cuter look. Please feel free to add the discussion using the comment section.

All opinions in this blog are the Author's and should not in any way be seen as reflecting the views of any organisation the Author has any association with. Twitter @scottturneruon

Picobot - a swarm bot

One of the most interesting small robots on the market is the PicoBot from 4Tronix (http://4tronix.co.uk/blog/?p=708). 

These are small, relatively low-cost robots with a good range of basic sensors based around Arduino. A nice feature is they are quick to put together (5-10 minutes each for the two above).  The size, time to build and the radio modules make them an interesting option for playing with swarm robotics - if only I had the money.

Don't let the swarm robot idea put you off, as small robots to playing with programming they are good in their own right. Being small with the ultrasonic sensors gives them an non-threatening look; add in they have some build it programs to play with (select by buttons on the bot) to get you going without any programming.

Related Links

• Narinder's Swarm Robots
• mbots - graphical programming and Arduino
• Edge following CrumbleBot

All opinions in this blog are the Author's and should not in any way be seen as reflecting the views of any organisation the Author has any association with.

Edge following CrumbleBot

Recently I have been playing with the CrumbleBot (http://4tronix.co.uk/store/index.php?rt=product/product&product_id=493) based around the Crumble Controller (http://redfernelectronics.co.uk/crumble/) providing a intuitive graphical interface (similar to Scratch) to control two motors and four inputs/outputs. The CrumbleBot comes with line-detecting sensors and Light-Dependent Resistors for light detection, with a few other features that I have yet to play with. So is nice little framework for simple robotics. Make sure you order the Crumble Controller at the same time as CrumbleBot.

Building the 'Bot' is relatively simple and 4Tronix have provided some easy to follow instructions on-line (http://4tronix.co.uk/crumble/CrumbleBot.pdf) that are almost foolproof (I manage to build it!).

So I wanted to experiment with making a edge following robot - where the robot goes around a line by following the edge of the line. The idea is while make small movements,

• Check that one of the sensors is on the line (in my case the right sensor);
• If that sensor detects the line, then pull the robot to the left slightly and then forward a small step;
• If the sensor does not detect the line, the pull the robot to the right slightly.

Accidentally, I end up playing with two ways to detect the line. Started with connecting, using crocodile clips, the two sensors to the Crumble and treating them as analogue signals and if there was a big difference between the one I want to stay on the line and the one off the line then the line's edge is detected. The assumption is the sensor on the black line reflects less light, so a lower value produced and that is what is detected. It work see the video below that used this approach - but the assumption was wrong.

4Tronix contacted me saying the line sensors are digital (thank you for that), so used them as a digital inputs and it did simplify the code a lot and still worked.





All opinions in this blog are the Author's and should not in any way be seen as reflecting the views of any organisation the Author has any association with.