This post forms part of occasional posts about playing with Marty the Robot V2 (https://shop.robotical.io/products/marty-the-robot-v2) from Robotical. In this post I am going to do a quick look at initially setting it up and a bit of Scratch programming.
Set-up
I had a partially assembled version so most of the fiddly bits of putting the legs together etc were done; the instructions clearly make out the start of the instructions for building the partly assembled Marty. It is ready to build from the box including adding in a screwdriver. The only deviation I had to make from the build instructions was I having to partially disassemble the arm bit already done to fix the rest of the arm together - this was minor.
I am initially running this through an iphone and setting it up to do this was exceptionally easy to do and follow.
- Download the app (just search for 'Marty the Robot' and found the right app),
- pair it up with BlueTooth,
- calibrate - just followed the instructions and it was fine.
Programming in Scratch
From the App there is an option to program in Scratch, just started it up and in the motion and sensing options there are blocks for Marty. Then it was just the same as other Scratch programming - an example is shown below.
Where next
Python, connecting to wifi and add some extras.
Nice article.
ReplyDeleteThis comment has been removed by the author.
ReplyDelete