Skip to main content

Crumbly Toilet Roll Junkbot

Guest Blogger Nathaniel Roberts, Nuffield Research Placement Student working at the University of Northampton. Nuffield Research Placement scheme provides students in their first year of a post16 course to work with STEM professionals http://www.nuffieldfoundation.org/nuffield-research-placements.

Toilet Roll Junkbot
Nathaniel Roberts

Cut a slit in a toilet roll.
Cut another toilet roll in half, then arrange the pieces in a T.
Feed the bottom of the T into the slit, and tape together.
Cut two lines into the edge, and do the same on the opposite side of the circle. Copy this for the other side of the tube.
These geared motors from the Camjam EduKit 3 should fit into those gaps.
Stick a battery pack to the back, and use crocodile clips to wire it all up to a crumble. The battery pack can connect to the + and - on either side at the top of the crumble, and the motors connect to the + and - of their respective sides of the crumble.








Using a Micro USB to USB cable, the crumble can be plugged into a computer and can run code from the crumble software ( http://redfernelectronics.co.uk/crumble-software/ ).
This example code would make the junkbot move forward for a second, turn either left or right, then move forward for another second before stopping.
The back of the bot was extremely heavy (with all the batteries). The front wasn’t heavy enough to grip most surfaces very well so the wheels would often spin without the bot moving. Also, the toilet rolls were only just strong enough for the job. After a few uses, especially around the motors, they started bending. Eventually, the motors ended up 'wonky' despite attempts at fixing it.




All opinions in this blog are the Author's and should not in any way be seen as reflecting the views of any organisation the Author has any association with. Twitter @scottturneruon
Labels:

Comments

Post a Comment

Popular posts from this blog

Robot Software

In the previous blog posts for this 'series' "It is a good time...."  Post 1  looked at the hardware unpinning some of this positive rise in robots; Post 2  looked at social robots; Post 3  looked at a collection of small robots; Post 4 looked at further examples of small robots Robots, such as the forthcoming Buddy and JIBO, will be based some established open sourceand other technologies. Jibo will be based around various technologies including Electron and JavaScript (for more details see:  http://blog.jibo.com/2015/07/29/jibo-making-development-readily-accessible-to-all-developers/ ). Buddy is expected to be developed around tools for Unity3d, Arduino and OpenCV, and support Python, C++, C#, Java and JavaScript (for more details see http://www.roboticstrends.com/article/customize_your_buddy_companion_robot_with_this_software_development_kit ).  This post contin ues with some of the software being used with the smaller robots.  A number ...
1 comment
Read more

Speech Recognition in Scratch 3 - turning Hello into Bonjour!

The Raspberry Pi Foundation recently released a programming activity Alien Language , with support Dale from Machine Learning for Kids , that is a brilliant use of Scratch 3 - Speech Recognition to control a sprite in an alien language. Do the activity, and it is very much worth doing, and it will make sense! I  would also recommend going to the  machinelearningforkids.co.uk   site anyway it is full of exciting things to do (for example loads of activities  https://machinelearningforkids.co.uk/#!/worksheets  ) . Scratch 3 has lots of extensions that are accessible through the Extension button in the Scratch 3 editor (see below) which add new fun new blocks to play with. The critical thing for this post is  Machine Learning for Kids  have created a Scratch 3 template with their own extensions for Scratch 3 within it  https://machinelearningforkids.co.uk/scratch3/ . One of which is a Speech to Text extension (see below). You must use this one ...
5 comments
Read more

Scratch and web-cams in Scratch 3

Scratch 3 was launched on 2nd January 2019, so I wanted to know would Webcams still work with Scratch 3 as it did with Scratch 2. For example, in a previous post  Scratch, webcams, cats and explosions  the cat (Scratch) moved across the screen and a button burst when the object moved in the camera onto it.  Can the same thing be done in Scratch 3? The short answer is yes, but it is done slightly differently. The first change the video capture is not there in the blocks automatically; but is an extension that needs to be added. First, you need to add the extension blocks for video sensing. Go to the little icon at the bottom left of the screen (as shown below) this takes you to the extensions menu. Next, find the Video Sensing option and selected. The webcam, if enabled, with start automatically. A video sensing set of blocks is now in the list of block options.  The rest is very similar to doing this in Scratch 2. Moving ...
3 comments
Read more